Z CAM WonderLive

Z CAM WonderLive is a feature within Z CAM Controller that performs live stitching of video stream from Z CAM S1 & Z CAM S1 Pro through the Ethernet port, and output to RTMP.

Z CAM WonderLive requires a valid software license associated with a designated Z CAM S1 or Z CAM S1 Pro to use and nontransferable. Note that Z CAM WonderLive only works on Z CAM S1 with firmware version 0.65 or above.

System Requirements
OS : Windows 10 64-bit
CPU : i7 is recommended
GPU : AMD WX7100, Nvidia GTX 1070/1080 are recommended
Memory : 8GB or above
Network Adapter : Two network adapters are recommended. One directly connected to Z CAM S1 and the other one to Internet for streaming.

Supported Features
  • Up to 4K output resolution equirectangular image
  • Save live stitched video file
  • Preview live stitched video
  • Weibo Live integrated
  • RTMP live streaming output
​Quick User Guide
  1. Open Z CAM Controller, select network mode to Direct, connect Z CAM S1 to PC directly through the Ethernet port.
  2. Connect power to Z CAM S1 and it will be turned on automatically.
  3. PC should be connected to Internet in order to perform RTMP live streaming.
  4. On Z CAM Controller, click the tab Tools and select Z CAM WonderLive, four IP addresses will be detected and shown.
  5. Select the below options accordingly:
    6. Stitch template
    • Auto adaptation : Configuration file will be generated automatically.
    • PTGui file : Browse to select your own PTGui file deemed fit.
    Encode
    • Select resolution, bit rate and IDR interval according to network conditions.
    RTMP
    • URL : Manual input URL to stream.
    Output
    • Preview : Select this output option to enable live preview in equirectangular format.
    • SDI : Blackmagic Design DeckLink Studio 4K card has been functionally tested and verified. Note that if SDI is selected, all other output options would then be prohibited.
    • Stitched file : Save stitched video (with audio track) to a file.
    • Source file : Save original video/audio streams to four respective files.
    Note that RTMP, Preview, Saving stitched video could work simultaneously depending on system performance.

  6. Press Live to start live streaming.

About us

​Z CAM is a product line created by a team of innovative and creative people dedicated to develop high performance imaging products and solutions. Read more

Disclaimer: All product features and technical specifications stated are subject to the sole interpretation and explanation of Shenzhen ImagineVision Technology Limited, and subject to change without notice.

Contact us

kinson@z-cam.com

Address

1A, F5, TCL International E City, 1001 Zhong Shan Park Road, Nan Shan, Shenzhen, China

Level 48 Langham Place, 8 Argyle Street,
Mong Kok, Hong Kong
Copyright © Shenzhen ImagineVision
Technology Limited. All rights reserved.


Privacy Policy